How to use the new Firestorm Performance Floater and Autotune feature

New Firestorm, new features 

The latest Firestorm release has a new feature (albeit one that I still consider experimental), the "performance floater". In recent blog posts, I've explained  why I created this, in earlier blogs and most recently, in "Upgraders of the lost ARC" I explained a bit about what it does. This post is all about "How to use Performance Floater". 

Bundled with the Performance Floater is the Autotune FPS feature, I'll also explain how this works, and how to best avoid getting yourself into a muddle with it.

For a more concise, and probably more readable summary of these two features please refer to Inara Pey's excellent write up, and you can also click on the '?' icon at the top of the floater to go immediately to the Firestorm wiki page, dedicated to this function, which will be maintained and updated as the feature develops.

What does Performance Floater do for me?

The Performance Floater shows you in real-time what parts of the scene are taking the most time, and slowing down your graphics. In particular, this first release focuses on avatars and allows you to see which avatars are truly lagging you; it also allows you to examine your own attachments to see how they perform.

Ok so what about Autotune?

Autotune is a first look at our attempt to allow the viewer to automatically manage some of your settings to attempt to give you the performance level that you request and keep you there.

Keep in mind, that 

Performance Floater best practices.

Initially, we will ignore Autotune and look instead at manual tuning and how the performance floater can help us.

Given that the motivation behind this feature was to highlight the damage that segmented bodies have done to SL performance, it will come as no surprise that it is most useful when applied in crowd scenes. I wanted to allow a finer-grained tuning experience that would allow you to enjoy a crowded club, or similar scene without having to de-render everyone and completely ruin the atmosphere. So how do we go about this?

Step by step - A quick guide.

Step 1 - Open the performance floater.

The first thing we need is information, it is hard to know whether you've improved anything without measuring before and after. To open the performance floater, we have a few options

Look for the "Improve graphics speed..." menu entry on either the World menu or on the Advanced->Performance tools menu.

It can also be added to your toolbars for quick access. Look for the Gauge icon on the tool pallette

Step 2 - Review the summary stats

We start with the overview panel, which tells us what our current Frame rate (Frames Per Second, aka FPS) is. You may also see a warning such as "User limited FPS" or "In Background", these are intended as a reminder that you are not getting the full potential because you have either deliberately limited the FPS or are "tabbed out" on another screen/application such as Discord/Chrome.

Below this is the summary data and the first clue as to what is happening to our FPS.

A more complete explanation of these numbers can be found here. What we can find here though is the first hint about what we need to do. 

Best practice - Start with the largest number as this is where the biggest gains can be made

If scenery is the largest number then we might start to think about whether our draw distance is too high etc. However, if we are sightseeing or taking photos, then we might want the scenery to be in full glorious detail. If we are shopping we want to see the goods on display, but don't really need to see the displays far away. Think about what it is you are aiming for. 

Most of the time you will find that either scenery, avatars or both are high. But occasionally we can find that the other numbers are worth a quick look. If the UI is more than a few percent then consider closing down unwanted chat windows and inventory, etc. If the "HUDs" costs are high, then you should remove as many as you can or simply hide them all using the "show HUD attachments" option on the Avatar menu (alt-shift-H on Windows). 

Best practice for general FPS health - Close unnecessary UI and remove (not minimise) HUDs 

Keep your UI windows closed and remove HUDs when not using them (the "favourite wearbles" feature is amazingly useful for this.)

"The scenery is killing my FPS"

In this first release, the amount of fine-grained tuning for scenery is very limited (I was focused more on the Lagatar problem). However, we provide quick access to a couple of the controls that make the biggest difference. 

Clicking on the graphics settings panel in the floater will take you to a subset of the preferences found on the main preferences panel. Here we can make wholesale changes to the quality of our graphics using the "Quality vs speed" slider, or tweak individual parameters. The main features exposed here are Draw distance, shadows and water reflections. Draw distance and water can be changed dynamically, and you can watch the impact. Changing shadows is slightly more disruptive as the viewer has to change how things are drawn and this causes a "pause", especially on slower machines.

Best practices for scenes - dumb down the water, shrink the draw distance, remove the shadows. 

In general, we want to keep the visual quality as high as we can, whilst still being able to move about. With this in mind, you need to pick and choose between the options.  Since EEP, water reflections and refraction have been a terrible burden (a fix is coming from LL, but it is not here yet), You can still have decent looking water, without reflections. Of course, the most obvious (but frequently overlooked is Draw Distance. It's simple really, drawing more "stuff" takes longer. reducing the draw distance shrinks the number of things that need to be considered by the viewer. In a club or shopping mall, shrink the DD to 64m and you'll be more nimble.

Water - If you are not near water, or do not care about water reflections then you should almost certainly switch water reflections to "None; opaque" this gives a big FPS boost whilst still leaving the water looking reasonably nice. For the biggest win, you can always fully disable water on the advanced menu, under rendering types. But don't forget to turn it back on.

Shadows -  The most visually disruptive change. I love to have shadows in a scene, but shadows will typically more than halve your FPS. So if you really need that extra boost then foregoing shadows is a good choice. Use the shadows setting on the floater or in the preferences. this is very useful if you are at a shopping event or club where the shadows are probably not that important.

Things not to do (probably) - Killing Advanced lighting - ALM. 

A lot of people automatically reach for the advanced lighting kill switch in preferences and proclaim the amazing boost they get. For many people, that boost is dominated by the fact that the shadows get disabled too. try turning off shadows only first. Disabling ALM can have detrimental effects on some machines as it prevents some GPU use, loading more on the CPU. However, if you are on a poor network, then ALM will reduce the bandwidth as materials will not be fetched.

OK, so that's the global scene dealt with.

"OMG the avatars are killing me"

When the statistics suggest that avatars are a significant amount of the frame time we can look at the avatars nearby and decide what to do.  It does not take many segmented avatar abominations to totally destroy your performance. Modern BOM bodies without the "alpha cuts" or segments are far more performant. So how can separate the good from the bad?

The bar graph on the left of this screen gives a quick visual indication of the costs. This was my favourite feature of the original Linden Lab design, though it was used to show ARC, which as you may have gathered from my other writing, is practically useless.

Along the top of this panel we have a slider, this controls the maximum time we will allow an avatar to take. On the screen above I have 23 avatars in the scene and they are taking a total of 50 milliseconds. Without going into a maths lesson this is a problem, a very large amount of time is being consumed. We can also see that the top 3 "offenders" (those avatars taking the longest) are a large chunk of that total. 

If we slide the slider from the right to the left the limit will decrease. In this example, I can set it somewhere around 3800, and any avatars above the limit will be "optimised".

The optimisation works at a fine-grained level that was not possible in the past. The first thing that we do is remove the shadows of the laggiest avatars, this will halve their render time. When this happens an 'S' will appear in the column between ARC and Name. The further you decrease the slider the more avatars will be affected. When an avatar has had their shadows removed and is still laggier than the limit you have set then we take the decision to force it into an Imposter. An 'I' will appear between the ARC and the name.

Imposters are not everybody's cup of tea, but in a crowded club, a few imposters can lift your FPS whilst still allowing a decent visual experience. Try it out and decide for yourself. Derendering is another option of course (not supported directly on this release but accessible on the people floater as usual), "Render friends only" is of course another choice but keep in mind that you cannot easily bring them back. If you don't want to see anyone at all (yourself included) then the check box at the bottom of the panel allows you to disable all avatars.

Best practices - go little by little, and don't forget to reset later!

The most common complaint during early testing was from people finding that they were seeing everyone as imposters. The slow animating, flat, low-resolution cutouts are great at a distance but not so nice up close. If you find you are seeing them everywhere then you probably forgot to reset your "Maximum render time" slider.

Things to remember: 

1. Both this and Autotune change your settings. Use graphics presets to save and restore sane settings just in case.
2. What you see is the cost of drawing this scene on your machine. Something not in view will show as very low cost. When looking at your attachments, make sure that your avatar is in view and not partially hidden.

Is it me? How can I be sure?

Your own avatar will appear in the list highlighted in yellow. Due to how the viewer works, it costs a little more to draw your own avatar than it does to draw others, so even if you are identically dressed to another avatar you will show more expensive on your screen (they will see themselves as more expensive too). 

However, you can check the cost of your own attachments by looking at the "Your avatar complexity" panel. This panel lists all of your non-HUD attachments and their costs. You can now see what is the most costly item you are wearing and decide if you can do better. You can also use this to compare the impact of different items, try on different hairstyles and see which ones are laggier. In the market for a new body? Grab the demos and wear them all, compare the performance as well as the looks before making your choice.

Can't Firestorm do all this for me? Auto tuning, the pros and cons.

Succesful Auto tuning requires a little restraint and some managing of your own expectations. 

There is nothing I can do to make your decade-old potato of a laptop, run at 50FPS in a sim packed with Mesh avatars. Not happening. However, Auto-tune can and will try to do the best it can for you. 

Basic Autotuning

When using Autotune we set a target FPS level and whether we want to adjust the avatars only or the avatars and the scenery. We can also decide if we want it to run continuously while we continue to enjoy ourselves or to run once and then stop.

Troubleshooting tip: why is my friend flat, pixelated and their animations slow?

If you unexpectedly see imposters everywhere then double-check that Autotune is not forcing your Render time limit too low. If so, turn off autotune and manually adjust the slider.

Autotune FPS - Best practice #1 start low. 

Consider this, you are at a club, surrounded by gyrating mesh bodies. Your FPS has dived to single digits, and not even high single digits, you just want to move around a bit but it is like wading through molasses. You can't really turn off all the avatars, because then you'll barge them all out of the way and spend the next half an hour apologising. 

Set the Autotune to something higher, but not too high, Try 12 FPS maybe? Once you have selected the target FPS, you can hit start. The target will be shown at the top of the floater, Starting as Yellow or Magenta, and hopefully turning green when we reach or exceed the target.

The Autotune will consider the factors and try to tune subtle things such as avatar shadows first. Then resorting to other measures. You'll see the Mac Render Time slider zipping to and fro. If you are too ambitious then the Autotune will try its hardest and perhaps overshoot, then undershoot and you'll be back and forth and not settling. Pick something comfortable and within reach and you'll find the experience more rewarding. 

Autotune FPS - Best practice #2 Avatars only or Avatars first?

By default, the tuning strategy will be set to "Avatars and Scene" this allows the engine to consider avatars first and then if it cannot get enough boost from the avatar tweaks then it will resort to scene wide changes. Which of these you want is very dependent upon where you are and what you are doing.

If you are wandering in a scenic region and there are a number of people around then you might select "avatars only" to ensure that you keep the scene at the settings you like but allow the engine to degrade the avatar quality of others as you walk around. 

Autotune FPS - Best practice #3 Experiment with autotune settings (but don't forget that you did)

The "gear" icon on the autotune panel takes you to advanced options. some of these are rather obscure and I won't explain them in detail here, but feel free to experiment. What is the worst that can happen? It will change your settings and everything will look weird. Use the Firestorm graphics preference save/load options to store a setting to return to should that happen.

Have fun, I hope that this feature helps.

Most of all I hope that through this new way of presenting the determining performance you not only be better able to manage your experience in SL but will learn more about the impact we all have on one another's Second Life. 

I hope to extend this feature with future releases and integrate it with the Linden Viewer so that a similar feature is available to everyone no matter what viewer they are using. What is more, the next few months should see some dramatic changes in the rendering performance going live in Second Life as Linden Lab has been working very hard on performance tuning. I hope to be able to adapt these tools to the "new normal", to provide more options and add more "intelligence" to the tuning.